News

QuickLinks

Successful implementation of aluminum wheel painting lines for Swiss Ronal Group

02/26/2018

High speed rotating atomizers ensure reduced overspray during final clear coating.

Aluminum wheel painting

Milano, February 26th, 2018 
As one of the world’s leading paint shop suppliers, many think that Dürr is focused only on painting vehicle bodies, such as passenger cars, vans, truck cabs or buses. However, Dürr offers a wide range of painting applications for non-automotive-goods, trains and also for plastic and wheel paint shops. For the Swiss multinational Ronal Group, one of the leading players in aluminum wheel production, Dürr has recently implemented modern wheel painting lines in Mexico and the Czech Republic.

Within the Dürr Group the Italian subsidiaries Olpidürr and Verind act as a center of excellence for aluminum wheel paint shops providing systems integration and high-end application equipment. Recently, they executed two projects for the wheel manufacturer Ronal’s production of diamond-cut wheels. High-sheen and front-polished, diamond-cut finished alloy wheels are very popular and demand a special process.

Specially designed self-adjustable spindles adapt automatically to different rim types and bolt circles.Ronal also produces rims in sophisticated design, as shown here in black and red.

 

Dürr supplied such a paint line for the finishing of diamond-cut wheels in Ronal’s Querétaro Mexico facility. Dürr Mexico, also based in Querétaro, played an important role in the project, especially in terms of local supply and installation, and will be on site for future service assistance. Supported by the worldwide network of the Dürr Group – whose expertise includes dedicated and customized planning of all crafts and process interfaces as well as efficient project management – the Italian subsidiary Olpidürr oversaw the successful implementation: The paint line in Mexico was commissioned in 2016.

In 2016 Ronal partnered with Dürr for a new paint shop at their site in Jičín, Czech Republic. Dürr again employed the split-line design, as this configuration optimizes the production process by avoiding second runs on the same line. Both painting lines are completely housed, to avoid indoor pollution of the production hall. This design was also used in the Mexico project. Olpidürr was acting as a systems integrator. Verind was the paint application equipment specialist, contributing automatic wet paint application systems including the paint mix room as well as circulating and spray equipment. The painting lines are capable of processing both solvent-borne and waterborne paints with a ratio of “0÷100%”, thus meeting state-of-the-art requirements requested by the customer.

In addition to leading edge technologies and devices for wheel painting lines the Dürr concept for the Ronal paint shops in Querétaro and Jičín contained a variety of unique solutions focusing on energy savings throughout the plant.

In the Ronal aluminum wheel painting lines, wheels are transferred in a system of independent synchronized conveyor loops by manipulation robots provided with special grippers. To keep the production process running smoothly, in-house team of Dürr IT specialists developed supervision software for Ronal. Its’ use makes the production process extremely safe, manageable and allows for remote troubleshooting and modifications during the entire life-cycle of the paint line.

The site opening in Jičín was in January 2017 while SOP is scheduled for April 2018.

The Dürr Group has had a direct representation in Italy for many decades and currently employs around 260 staff there. The national companies in Italy offer the Group's entire portfolio: Olpidürr S.p.A. (Novegro di Segrate) operates in the fields of paint shops, exhaust-air purification systems and energy efficiency technology, while Verind S.p.A. (Rodano) specializes in paint application technology. The final assembly and conveyor systems business falls within the remit of CPM S.p.A. (Beinasco). Schenck Italia s.r.l. (Paderno Dugnano) is responsible for balancing technology. The HOMAG Group is represented in Italy through Giussano-based sales and service company HOMAG Italia.

The Dürr Group is one of the world's leading mechanical and plant engineering firms with outstanding automation expertise. Products, systems and services offered by the Group enable highly efficient manufacturing processes in different industries. Dürr supplies sectors like the automotive industry, the mechanical engineering, chemical and pharmaceutical industries, and the woodworking industry. The company has 86 business locations in 28 countries. The Group generated sales of € 3.57 billion in 2016. Dürr has around 14,400 employees and operates in the market with five divisions:

    • Paint and Final Assembly Systems: paint shops and final assembly systems for the automotive industry
    • Application Technology: robot technologies for the automated application of paint, sealants and adhesives
    • Clean Technology Systems: exhaust-air purification systems and energy efficiency technology
    • Measuring and Process Systems: balancing equipment as well as assembly, testing and filling technology
    • Woodworking Machinery and Systems: machinery and equipment for the woodworking industry

 

Contact:
OLPIDÜRR S.p.A.
Flavio Bodini
Paint and Final Assembly Systems
Phone: +39 (0) 2 70 212 219
E-Mail: flavio.bodini(at)olpidurr.it
www.olpidurr.it 


Dürr News